View Full Version : C0BA0..... finisher unplugged and still throwing code.
deannasockman
06-24-2009, 12:07 AM
The finisher is completely pulled away from the 3102 and I still have the code. Turned machine off, unplugged and pulled the finisher completely away... I am so frustrated. Do I need to clear something out on the board?
deannasockman
06-24-2009, 02:01 AM
You will never believe it.... Opened every door on the machine, hooked up finisher, rebooted and the darn thing started.
Good grief.
brenni
06-24-2009, 12:17 PM
You will never believe it.... Opened every door on the machine, hooked up finisher, rebooted and the darn thing started.
Good grief.
i read your 1st post and thought: i know this, just open the ddor an it will reset the code.....
it took me 1 day to figure that out when i had this problem http://www.copytechnet.com/forums/images/icons/icon8.gif
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.