View Full Version : PANASONIC 7718
flytyer
06-26-2009, 10:22 PM
How to enter service mode?? I need to calibrate developer and reset web count??
Tnx in advance
flytyer
suckis
06-27-2009, 08:31 AM
Hello flytyer.
To enter the service mode, press "USER PRESETS", "Multi-Copy key 3" and "Original Size A3" keys simultaneously, then F1 will appear in the display.
After replacing new developer, run F8-09.
After replacing new drum, run F8-14.
After replacing the web, reset F7-26 to 1 (80K).
I hope I helped.
flytyer
07-03-2009, 01:53 AM
TNX SUCKIS
I NOW HAVE THE M/C FIXED.
THE ONLY WAY I COULD GET INTO SERVICE MODE WAS TO:
PRESS AND HOLD "user preset", PRESS "orig ledger", then WHILE HODING THESE TWO KEYS, PRESS "3". BINGO WE HAVE F1
TNX AGAIN FLYTYER
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.