abilashvk
06-29-2009, 01:52 PM
Hi Everybody,
I'am very new to this biz420.Recently I had to inspect a machine showing C-6001.(As per service manual)I interchanged the CCD unit and PWB-OACB seperatly in another working machine and found both CCD & PWB-OACB are showing C-6701.On refixing original components back, then second machine also displayed C-6701 (which I was able to reset).Do some have such experience then pls., share.Is their any other resetting or shorting can serve the situation?I negetivly suspect possibility of both components going of simultaniously and does the cable replacement needed? Thanks for any help in advance
I'am very new to this biz420.Recently I had to inspect a machine showing C-6001.(As per service manual)I interchanged the CCD unit and PWB-OACB seperatly in another working machine and found both CCD & PWB-OACB are showing C-6701.On refixing original components back, then second machine also displayed C-6701 (which I was able to reset).Do some have such experience then pls., share.Is their any other resetting or shorting can serve the situation?I negetivly suspect possibility of both components going of simultaniously and does the cable replacement needed? Thanks for any help in advance