PDA

View Full Version : Bizhub Central Admin Software


Custom Search


computon
07-02-2009, 10:21 AM
Hi

I'm new to the world of Konica Minolta, and I need to administer 10 bizhub C25x series machines. I need to configure all the machines with the same address book entries for scanning etc..

I'm trying to be clever and save some effort, is there some software I can install on a PC to control all the machines centrally, or I am going to have to connect to each machines web interface and program each one manually?

Thanks for any help in advance!

dogsbody
07-02-2009, 01:15 PM
There is a big difference between C250/C252 and C253. However Pagescope Data Administrator should allow you to import and export addresses between different machines. It should be avaliable from the KM website to download. It is a reasonable download but weel worth it if you are prepared to spend the time getting to know the software.
Cheers.

copytechman
07-02-2009, 01:45 PM
I second that, big download, also good idea to make sure your firmware (In the machines) is current. That can have an impact on how well pagescope works with your devices.

Regards!
A.

computon
07-02-2009, 02:22 PM
OK thanks for that, I'll take a look.

Custom Search