PDA

View Full Version : Firmware problem C500

Custom Search


alexg
07-06-2009, 07:12 AM
Hello, I have a problem with Hp 9850mfp, which is KonicaMinolta Bizhub Pro C 500/8050. I've loaded firmware provided by KonicaMinolta and machine shows SC 81-01 that means rom version doesn't correspond to the model. Anybody could send me Hp original firmware.
Thank you.
Alexsky
09-24-2009, 10:26 AM
Hello ,, Can you send me the firmware C500 pro ,,, because I have this problem sc-80-01 and I donīt have this firmware
Thankīs
john greece
10-12-2009, 09:56 PM
Hello, I have a problem with Hp 9850mfp, which is KonicaMinolta Bizhub Pro C 500/8050. I've loaded firmware provided by KonicaMinolta and machine shows SC 81-01 that means rom version doesn't correspond to the model. Anybody could send me Hp original firmware.
Thank you.
I have the IKON PRO 500C (KONICA MINOLTA BIZHUB C500) I've loaded firmware provided by HP 9850MFP and machine shows SC 81-01 and I dont know what to do. I have hp9850mfp firmware and i can send them to you if you have konica minolta firmware bizhub pro c500/8050 thanks.
john greece
10-13-2009, 09:47 PM
Hello, I have a problem with Hp 9850mfp, which is KonicaMinolta Bizhub Pro C 500/8050. I've loaded firmware provided by KonicaMinolta and machine shows SC 81-01 that means rom version doesn't correspond to the model. Anybody could send me Hp original firmware.
Thank you.
i CAN SEND YOU THE LATEST FIRMWARE HP 9850MFP AND ISW.
CAN I HAVE THE FIRMWARE AND ISW FOR KONICA MINOLTA BIZHUB PRO C500?
mongol1255
11-09-2009, 12:05 PM
my copier c500 fault code 56-11

can you help me ??
john greece
11-09-2009, 12:37 PM
my copier c500 fault code 56-11

can you help me ??


THE MANUAL SAYS
''Operation board /1 (OB1)''
I BELIEVE YOU NEED TO CHECK THE FIRMWARE
RRodgers
11-09-2009, 03:26 PM
I wonder why you guys would even "TRY" to flash the firmware on these boxes?!?!?
otomatic
03-14-2014, 05:16 PM
we have just got the sc 81-01 on our machine
it was jamming then kicked one the fuser temp codes and I reset that then I got 81-01
is that code a firmware issue and if so where on earth do I find it?
Tonerjockey.com
03-18-2014, 01:07 AM
Hello, I have a problem with Hp 9850mfp, which is KonicaMinolta Bizhub Pro C 500/8050. I've loaded firmware provided by KonicaMinolta and machine shows SC 81-01 that means rom version doesn't correspond to the model. Anybody could send me Hp original firmware.
Thank you.

There's a bulletin that shows this...not sure it's helpful as it seems to easy.

CAUSE: Dipswitch 4-0 is set to 0 (OFF) in the 25 mode.

SOLUTION: Set dipswitch 4-0 to 1 (ON) in 25 mode.

Nate
hugohug
07-18-2016, 12:21 PM
Hello ,, Can you send me the firmware C500 pro ,,, because I have this problem sc-80-01 and I donīt have this firmware
Thankīs

We are very badly need of firm ware for konica minolta bizz hub c 500 mfp printer .please let me know the availability.we have got two printers giving 80-01 error
hugohug
07-18-2016, 12:26 PM
I wonder why you guys would even "TRY" to flash the firmware on these boxes?!?!?

Sir...we do not know the procedure for flasing the firm ware on these boxes.please give the procedures to enable me to try to flash on these boxes.we have got 2 now od c 500 mfp printers with 80-010errors
RRodgers
07-18-2016, 01:23 PM
We are very badly need of firm ware for konica minolta bizz hub c 500 mfp printer .please let me know the availability.we have got two printers giving 80-01 error

I guess the next question is how bad do you need them?
hugohug
07-22-2016, 08:15 PM
I guess the next question is how bad do you need them?

My both c 500 printers are down for want of c 500 firm ware.please let me know where I all get them and how much we have to pay to get them

Custom Search