PDA

View Full Version : konica c 500

Custom Search


thuo
07-10-2009, 11:14 AM
what is error code sc 46-21 in konica c500:(
thuo
07-10-2009, 11:17 AM
What is error code sc 46-21 in konica c 500

thanks
JSC
07-10-2009, 11:21 AM
E46-21 Expansion process from memory
to page memory is not
completed within the specified
time.
Compression process from
page memory to memory is not
completed within the specified
time.
Evolution from memory to page
memory is not completed
within the specified time.
Compressed data transfer from
memory to memory is not completed
within the specified time.
thuo
07-10-2009, 11:26 AM
What is the way to go in this problem sc46-21
mrwho
07-10-2009, 11:41 AM
What is the way to go in this problem sc46-21

It's hard to say. You could have a defective board. One of the following:

Printer control board (PRCB)
Image processing board (IPB)
Program of overall control board (OACB)

Try to recheck all of the connectors.
JSC
07-10-2009, 01:39 PM
What is the way to go in this problem sc46-21

You could start by re-seating or replacing the memory sticks
edmund
07-13-2009, 12:53 PM
Does the error come up immediately does the machine predrive
what I am trying to determine what stage of the boot proccess the machine give this code .If it is early while the sub power switch is turn on then it could most likely be the ORCB board if it 's a couple of seconds later it could be the PRCB
The service manual lays mentions these board pertianing to this error code

Custom Search