View Full Version : J65-02
fernan
07-12-2009, 06:12 AM
hi folks i have this BizHub 1050e now i'm facing a problem the jam code was J65-02 i have replce the sensors,mirror seals and even the ADF control board but problem still the same. machine now is not working beacuse of this.
can any one help on this i really appriciate it.
Thanks
jeroen2005
07-12-2009, 11:41 AM
Hello,
Enter the service mode,press 01 Machine Adjustment key,press the 07 ADF adjustment key,press the 03 ADF sensor Sensitivity adjustment key,press start key.
fernan
07-12-2009, 06:48 PM
thanks for the response but i have done that sensor sensitivity adjustment
albasoul06
07-13-2009, 05:49 PM
check completion of adjustment on the copy screen after performing both ADF sensor sensitivity adjustment and ADF
centering sensor sensitivity adjustment
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.