PDA

View Full Version : C6500 ADU rebuild


Custom Search


dogsbody
07-21-2009, 12:00 PM
Hi all,
After some advice, tomorrow I have to rebuild the ADU on my C6500, I was there this afternoon but didn't give myself enough time to get the job done.
Does anyone have any tips on the best way to get at and change all the adu rollers.
Cheers.

mrwho
07-21-2009, 03:38 PM
Never did it on the C6500, but if it's anything like the 7075, it should be easy to exchange the rollers - just a matter of taking out the frontside ballbearings and get the rollers out through the hole - no need to go messing on the backside. But, again, I never did it on that particular machine, so...

HORSE
08-18-2009, 06:51 AM
Hi all,
After some advice, tomorrow I have to rebuild the ADU on my C6500, I was there this afternoon but didn't give myself enough time to get the job done.
Does anyone have any tips on the best way to get at and change all the adu rollers.
Cheers.

Have done it a few times myself

Custom Search