Biz C300 Admin codes

[JSC]

I have to put admin codes on a C300 with a fiery, no problem..........Other than they have Mac's and i have very little experince on macs so if anyone could give me some instructions on the mac side of it that would be great............

Thankyou

[buster68]

From an open document click on File and Print.
In the print dialogue box select the Fiery printer. Two drop lists below printer you'll see Copies and Pages, click on the list and go to Owner Information. Input the password. To save the setting for future use, select the Presets droplist and either Save or Save As(if you want to rename the setting).

You may see two password entries in Owner Information, I can't remember which one to use, trial and error should get it for you.

[JSC]

Thanks for the reply Buster68 i got there in the end