PDA

View Full Version : Welcome to the new Muratec Forum


Custom Search


Aneurysm
07-24-2009, 05:31 PM
The title says it all, Welcome to the new Muratec Forum!

We will do our best to find and move all the existing posts regarding Mutatec equipment into this forum in the near future.

knightfall
03-28-2013, 12:17 AM
wow

fixthecopier
03-28-2013, 11:36 AM
I have something to say about Muratec. They have really good tech support.

blackcat4866
03-29-2013, 01:12 AM
I believe that I've worked on two Muratec faxes. =^..^=

JR2ALTA
03-29-2013, 03:32 AM
I have something to say about Muratec. They have really good tech support.

True that. They are knowledgeable but even if they weren't I'd be satisfied by how kind they are. Talk to east coast a-holes for Kyocera or 2 hrs on hold with Konica makes you appreciate it.

JR2ALTA
03-29-2013, 03:45 AM
..but I don't think they make their own products anymore. at least not full size mfps.

faizufra
03-29-2013, 06:08 AM
Hi, Currently we dealt with MFX2010 in Muratec. So you have any doubt in the Black & White machines. you can ask me

rec6339
07-03-2017, 07:18 AM
Hi, Currently we dealt with MFX2010 in Muratec. So you have any doubt in the Black & White machines. you can ask me

Hello,I have MFX2010.I'd like to know how to reset Fusing unit.
Can I need to replace the new fusing unit or just reset by press some keys?

Could you give me some advice?

blackcat4866
07-03-2017, 01:32 PM
Hello,I have MFX2010.I'd like to know how to reset Fusing unit.
Can I need to replace the new fusing unit or just reset by press some keys?

Could you give me some advice?

You got really close! You have posted in the "Welcome to the new Muratec Forum" post.

Perhaps you would like to start a new post to discuss you topic. Look for a button labelled "New Thread".
=^..^=

Custom Search