PDA

View Full Version : C200 missing scan to SMB settings


Custom Search


emujo
07-27-2009, 01:08 PM
According to the specs for this MFP, scan to SMB should be available out of the box (no enabler chip). I can't see settings for SMB via page scope or through LCD control panel. All I have is PC email and internet fax options. Is there a software switch that needs to be turned on or something else I'm missing? Thanks

pajeroid
07-27-2009, 01:17 PM
We had to update the firmware on ours before it appeared - but it does only appear in pagescope when creating a new one touch destination.

emujo
07-27-2009, 01:54 PM
Thanks for the tip, I will update f/w and let you know.

Custom Search