Deuces
08-04-2009, 06:47 PM
I've been having issues accessing the web interface on my c350 (embedded controller, not fiery). When i type the IP, it sticks on "Waiting for 192.168.1.xx"
I've done lots of searching, and attempted the following:
Power Cycle (both the hard switch and unplug/replug)
Old PC with .net framework 1 (+sp 1.1)
Check network settings
Firefox browser and IE browser on both current up-to-date pc and old pc with .net 1.1
I've verified i can ping, scan to mailbox, and print to the machine.
I've also verified that I CAN access the web interface for all of 15-20 seconds immediately after a power cycle. After the 15-20sec has passed, all activity halts and the status bar sticks back on "Waiting for 192.168.1.xx"
Any help would be much appreciated.
I've done lots of searching, and attempted the following:
Power Cycle (both the hard switch and unplug/replug)
Old PC with .net framework 1 (+sp 1.1)
Check network settings
Firefox browser and IE browser on both current up-to-date pc and old pc with .net 1.1
I've verified i can ping, scan to mailbox, and print to the machine.
I've also verified that I CAN access the web interface for all of 15-20 seconds immediately after a power cycle. After the 15-20sec has passed, all activity halts and the status bar sticks back on "Waiting for 192.168.1.xx"
Any help would be much appreciated.