ynukee
08-20-2009, 03:28 PM
Hello, everything ok??
well, it's me again, i was installing a Bizhub C451 with IC-409, so i've got a problem, when i was printing from Fiery(IC-409) the colors where wiht low density, however when i did print directly by the EMPERON, the image was very nice, so i did the factory defaults on the fiery and so reconfigured all again and calibrate... but for my surprise the colors where low density again, i tried to print with default configuration of fiery, but no result...
so a removed the IC-409 and the video interface from the machine, and now it doesn't turn on anymore, even re-installing the IC-409.
when i plug the machine on the energy and turn on the power switch, only the two LEDs (BLUE and Orange) turn on and the main power LED on the pannel turn on too, but the Display doesn't and no movement on the machine motors.
Thanks to everyone.:D
well, it's me again, i was installing a Bizhub C451 with IC-409, so i've got a problem, when i was printing from Fiery(IC-409) the colors where wiht low density, however when i did print directly by the EMPERON, the image was very nice, so i did the factory defaults on the fiery and so reconfigured all again and calibrate... but for my surprise the colors where low density again, i tried to print with default configuration of fiery, but no result...
so a removed the IC-409 and the video interface from the machine, and now it doesn't turn on anymore, even re-installing the IC-409.
when i plug the machine on the energy and turn on the power switch, only the two LEDs (BLUE and Orange) turn on and the main power LED on the pannel turn on too, but the Display doesn't and no movement on the machine motors.
Thanks to everyone.:D