View Full Version : bizhub 600 c 6708
faisal jilani
08-20-2009, 09:48 PM
hi.i have biz hub 600 this machine code is coming c 6708 i reset but again is coming any beady no this problem.
ni311
08-21-2009, 02:41 PM
Code:
C-6708*
Causes:
AGC adjustment level abnormality.
• The light blocking cover at the read section and the lens cover are removed.
• The connector of the CCD board (CCDB) is disconnected.
• The power cable of the CCDB is unplugged.
• The IC protector of the CCDB converter board is cut off.
• The light volume of the exposure lamp is excessive.
• The exposure lamp does not light up.
Estimated abnormal parts:
CCD board (CCDB)
Exposure lamp (L1)
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.