REMCO
08-21-2009, 08:24 PM
I have a customer with a dialta 2510f that the copies are coming out with
raised print. Also she says the ink will rub off. Second issue is the display shows change Imaging unit. I have installed a new drum unit and installed
new developer & reset maint codes , but it still shows to change imaging unit.
On the raised print issue , I tried to raise fuser temp.& exchanged fuser unit with a known good unit. Copier has 800k on it.
My hair is turning gray, please help. thanks
Remco Tech
raised print. Also she says the ink will rub off. Second issue is the display shows change Imaging unit. I have installed a new drum unit and installed
new developer & reset maint codes , but it still shows to change imaging unit.
On the raised print issue , I tried to raise fuser temp.& exchanged fuser unit with a known good unit. Copier has 800k on it.
My hair is turning gray, please help. thanks
Remco Tech