View Full Version : c350 c-12c0 reset
cantonakis
08-21-2009, 09:29 PM
After changing the HD on the fiery the code c-12c0 keeps comming up when the machine boots. The controler boots fine and the new disk. I change the fiery from another machine and this code keeps comming up.
Does anyone know who to reset this ?
Thanks
xpress
08-21-2009, 11:46 PM
After changing the HD on the fiery the code c-12c0 keeps comming up when the machine boots. The controler boots fine and the new disk.
Thanks
Does it start or not? Try disabling it, installing it, and then enabling it.
copytechman
08-21-2009, 11:53 PM
According to the book thats the code for the hdd mounted to the mfp board, not the fiery.. check that!
Regards!
a.
cantonakis
08-22-2009, 01:39 PM
ok I solve the problem
In the system incoming, HDD , the HDD it was set to SET so I change it to UNSET and the problem went away.
Thaks to all of you
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.