JtheCopyGuy
08-28-2009, 05:20 PM
Hi,
I have a customer who has a Di5510 running a Pi7200e Fiery. We've connected it to the network and I can utilize the web connect to see the printer and print test pages/config pages. But anytime I install it on any of their Mac machines (mostly running OSX 10.5) it has an issue.
I've been installing via the Control Panel - add printer - IP printer
Give it the IP address and utilize the Fiery X3 driver (from Konica Minolta)
Then configure the options and boom, looks like it's gonna work.
But when I send any printjob to it, it tells me the Printer is Busy. Yet from the web status page it says the printer is Idle.
Im beginning to wonder if the Harddrive isn't dead on the Fiery and therefore is unable to spool print jobs? I'm not getting any errors and I can access the fiery from both console and web connect.
Any outlooks/ideas would be appreciated.
Thanks!
I have a customer who has a Di5510 running a Pi7200e Fiery. We've connected it to the network and I can utilize the web connect to see the printer and print test pages/config pages. But anytime I install it on any of their Mac machines (mostly running OSX 10.5) it has an issue.
I've been installing via the Control Panel - add printer - IP printer
Give it the IP address and utilize the Fiery X3 driver (from Konica Minolta)
Then configure the options and boom, looks like it's gonna work.
But when I send any printjob to it, it tells me the Printer is Busy. Yet from the web status page it says the printer is Idle.
Im beginning to wonder if the Harddrive isn't dead on the Fiery and therefore is unable to spool print jobs? I'm not getting any errors and I can access the fiery from both console and web connect.
Any outlooks/ideas would be appreciated.
Thanks!