ocetech88
09-16-2009, 07:19 PM
Hi ,
I've got a couple of C6500 with the same problem . When running 130gram silk SRA3 with heavy toner coverage it ripples the print/paper in the fuser . If the print has less coverage on 1 side and you ask for the print to be delivered face up you don't get the problem . Sometimes the print will jam in the fuser with the lead edge just past the exit rollers and the rest curled up behind it . I have tried a fuser rebuild including belt , rollers and all drive gears and bearings but this didn't make any difference . Any ideas ?
I've got a couple of C6500 with the same problem . When running 130gram silk SRA3 with heavy toner coverage it ripples the print/paper in the fuser . If the print has less coverage on 1 side and you ask for the print to be delivered face up you don't get the problem . Sometimes the print will jam in the fuser with the lead edge just past the exit rollers and the rest curled up behind it . I have tried a fuser rebuild including belt , rollers and all drive gears and bearings but this didn't make any difference . Any ideas ?