PDA

View Full Version : noise in a xerox xd100


Custom Search


Clint
02-02-2007, 08:31 PM
The noise seems to be coming from the optics as it only sounds during the scan phase, as the mirrors return home there is not any noise. To listen to it you would think it is in the fuser unit but i have taken it down and cleaned and lubed the ceramic bushings.

Wild Bill
02-04-2007, 05:52 AM
I don't do many Xerox but if I do and I have a technical problem I fax Parts Drop a question Partsdrop Online Store (http://www.partsdrop.com) I think this is their site or do a search.

hood4472
02-04-2007, 02:16 PM
Double check the optics drive motor and the rails. Both could cause a problem that involves noise. Good Luck.

Robin

lonestar777
02-05-2007, 02:29 PM
Look at the fuser gear, does it look like it is in good condition? These have a tendancy to break. Try calling The Parts Drop at 2013877776

Custom Search