PDA

View Full Version : C252 code c3451


Custom Search


copiers4africa
09-22-2009, 01:43 PM
Pls help i have replced the fuser and still the same problem...cleared the data and initialsed the machine still the same.

jb11223
09-22-2009, 01:55 PM
try trouble reset, should clear problem

emujo
09-22-2009, 01:58 PM
Subject:
C3451 (C-3451) at power ON.
Description:
C3451 at power ON.
Solution:

CAUSE: Poorly seated connector on PWB-M or failed PWB-M.

SOLUTION: Reseat all connectors on PWB-M. Thoroughly, inspect CNTH1 on PWB-M. Ensure that all the pins are properly aligned and that the connector is firmly seated. Replace PWB-M (p/n 4038 H001 01) as necessary.

copiers4africa
09-29-2009, 04:16 PM
thank u will try it:o:o

koketsomabuse
10-01-2009, 10:30 AM
Guys I am an absolute Novice, thus I have a similar issue and I need help. PWB-M = Power on Main Board?
CNTH1=?

Is there a Pictorial Help that I can get? please help I am desperate. Do I need to replace the Fixing Unit? Or just adjust i did the Error Clear and that keeps coming back and that could mean that the issue is not resolved. The Unit gets hot though and I guess that is good but it gives error...

Please help urgently.

email: koketsom@tluka.co.za
Skype: koketso.mabuse: just send comm even it says I am offline.




Subject:
C3451 (C-3451) at power ON.
Description:
C3451 at power ON.
Solution:

CAUSE: Poorly seated connector on PWB-M or failed PWB-M.

SOLUTION: Reseat all connectors on PWB-M. Thoroughly, inspect CNTH1 on PWB-M. Ensure that all the pins are properly aligned and that the connector is firmly seated. Replace PWB-M (p/n 4038 H001 01) as necessary.

Custom Search