PDA

View Full Version : Bizhub 750 Losing print with jams


Custom Search


Setright
09-24-2009, 07:14 AM
Hello!

Sorry about the subject heading, not sure what to call this:

At present the machine regards print as successful once it has passed the fuser exit sensor (second time for duplex). If a paper jam occurs, all the pages ahead of the fuser will be printed again, and those which are aft the fuser aren't.

When I used to work with Kyocera, we called this "Page Protection". Good stuff....but not when there is a booklet finisher attached.

If the Bizhub 750 is printing 5 booklets, and a jam occurs while set 3 is halfway completed, the machine will ask the users to remove the paper in the finisher, and this WILL NOT be reprinted, meaning that set 3 is lost.

Is there Dipswitch I can set to make page protection active on the booklet finisher exit sensor?

Custom Search