PDA

View Full Version : Fuser Parts? C250


Custom Search


xpress
09-28-2009, 07:19 PM
Fuser parts needed, we snapped that paper sensor. Anywher to get this small plastic part, i don't want a whole new fuser :(.

EarthKmTech
09-29-2009, 12:44 AM
usually with the colour machines you cant buy individual parts for the fusing unit as its changed as a complete assembly.

Its handy to keep some previously changed out used ones for this very reason ;)

hachetman
09-29-2009, 01:34 AM
Fuser parts needed, we snapped that paper sensor. Anywher to get this small plastic part, i don't want a whole new fuser :(.


A little super glue and baking soda will do wonders on broken plastic parts

perdana
09-29-2009, 03:19 AM
This is the Pn: 4038-5728-03

lamboalex
09-29-2009, 05:32 AM
nice find!

Bizhub
09-29-2009, 02:36 PM
This is the Pn: 4038-5728-03


I dont suppose you know if there is a part number available yet for the fuser guide plate (the one that customers snap off)

:)

mrwho
09-29-2009, 02:41 PM
AFAIK, the actuator is the only part available separately. For the rest, as has been said before, you better don't throw away those used fusing units you get when you replace them.

xpress
09-29-2009, 05:35 PM
O Prase the copier lord, didnt even see it when I was rushing through the parts manual, THANKS!!!!


EDIT: Hm, our c250 and c252 parts manual dont have em listed..

Custom Search