View Full Version : replacing imaging unit on c350
rhager174
02-07-2007, 04:13 AM
How hard is it to replace the black imaging unit on konica minolta c350?
DallasTech
02-07-2007, 03:19 PM
I think this is actually a user replaceable part, I would say not hard at all.
Easy..............Just make sure you or the customer gives the unit a good shake before its fitted.
10871087
02-08-2007, 04:13 AM
a well trained end-user can replace that item with ease.
gustavo.tsuru
02-12-2007, 08:45 PM
you can setup end off life in the service mode, when the unit show end off life, if this mode active, the machine doesnt work, be careful
The end of life is standard on "stop", I usually switch it to "not stop".
The replacement of the IU can be done by the customer for sure, but it's certainly not a bad idea to give a demonstration when the first IU needs to be replaced.
nightshade
05-23-2007, 09:58 PM
a well trained end-user can replace that item with ease.
A trained monkey can easily replace it. But office employee who doesn't care about the machine can easily screw it up!!!:eek:
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.