PDA

View Full Version : DI3510


Custom Search


lvillacci
10-13-2009, 02:47 AM
HEY GUYS. i had abort code on a di3510.turned out to be the mfb pcb.now i am getting very light copies. andthe copy is not centered.any help will be appreciated.:mad::eek:

Hansoon
10-13-2009, 06:56 PM
Likely wrong MFB board. The Di-3510 has #4384-1047-01.
The Di-2510 #4384-1048-01. The other models as far as I know have each different boards too.

Hans

mjunkaged
10-13-2009, 09:44 PM
I'd guess the setting-up would all need to be redone. IF some foresighted tech. printed out the setting list some time before the original mfb blew, you could copy settings off that page and fine tune, otherwise, time for all adjustments?
Probably need to re-do the F8 to re-calibrate the developer/toner density as well!

just my 2c.

Custom Search