PDA

View Full Version : compatibility of fax kit from BH200 to BH350


Custom Search


spektrumdx7
10-20-2009, 05:08 PM
I'm wanting to transfer a fax kit from a bizhub BH200 to a BH350. First of all, is it compatible? If so, if anyone knows the procedure it would very helpful. I found the fax board behind the back panel. I'm sure there's at least one DIMM chip to move, anything else. Also, do I need to activate the fax in service mode after install and if so how to go into service mode. Thanks. First time working on a bizhub so thanks for any help.

Hansoon
10-20-2009, 06:48 PM
Kits are the same for the BH-200, 250, 350 series. Consisting of Fax board, Hookup Harness, Backup Battery and an additional chip located at position CN5 (nearest the firmware update port.)

Here is the installation guide:

YouSendIt - Send large files - transfer delivery - FTP Replacement (http://www.yousendit.com/download/Z01QK0dvYXl6RTljR0E9PQ)

Hans

Custom Search