PDA

View Full Version : C253 Problem on 1st Print - Black Scattering


Custom Search


pajeroid
10-21-2009, 11:58 AM
Hello - I have a Bizhub C253 that is scattering dev all over the 1st page. We have tried changing the black IU.

I have attached a PDF example,

Any ideas? :confused:

JSC
10-21-2009, 10:00 PM
I have attached a PDF example,


You havn't attached an example.......... Check out the bullitin is this what your getting?

Bizhub
10-22-2009, 10:03 AM
You havn't attached an example.......... Check out the bullitin is this what your getting?


It will be the board !!! I only wish my handwriting was neater now
:)

rprem
10-22-2009, 12:58 PM
For the first print only its comes or it continues
after changing the iu also it comes like that ah
machine yeild ?

minoltaed
10-22-2009, 06:33 PM
We had one doing something that sounds alot like your problem and we had to replace the image control board to fix it. Send the old board in for repair and they fixed it for us.

pajeroid
10-23-2009, 09:56 AM
Whoops, didn't realise i'd posted this twice! What a cock! Anyway... The solution is the PRCB board so thank-you very much JSC, Bizhub & minoltaed!

The post I have been following is http://www.copytechnet.com/forums/konica-minolta/26389-c253-problem-1st-print-black-scattering.html This post does have an attachement. Sorry for the balls-up!

Thanks once again!

Custom Search