PDA

View Full Version : mac 10.6 and ic-402


Custom Search


minoltaed
10-22-2009, 06:28 PM
Just wondering if anyone has installed mac 10.6 drivers for a c351 ic-402 print controller. We cant seem to get it to work. Any suggestions would be appreciated.

Morlock49
10-22-2009, 10:37 PM
is the Mac an Intel Mac or an older mac. If its an Intel mac there is a different driver to get it working.

iMind
10-22-2009, 10:54 PM
Yep, your machine is an Intel and the operating system is leopard Snow "10.6" there is a patch for the fiery driver:
Support & Drivers Search Results | Product: IC-402 (http://onyxftp.mykonicaminolta.com/download/SearchResults.aspx?productid=707)

Well what is your problem, canīt you print or canīt you even see the fiery with ping.

minoltaed
10-22-2009, 11:02 PM
Can ping it all day when we install the driver nothing cant see the driver or find it anywhere. We have followed the install instructions, just wondering if anyone has got it to work yet or if there is some bugs to still work out. Can print to a 10.5 just no luck with 10.6 yet. Already have the patch for the fiery just wont work.

iMind
10-22-2009, 11:25 PM
Iīm afraid I canīt help never seen Snow Iīm still stuck with a G4 powerPC that runs Leopard very well but does not run Snow, snow only runs on Intel based Macs. Sorry

" Could check and see if it prints with the Macs generic portscript driver it will be very basic but just see if it prints."

Try activating Appletalk on the Mac and copier

Custom Search