PDA

View Full Version : CF-3102 Access Problem


Custom Search


captain1976
10-27-2009, 02:58 PM
I just got a nice machine from a wholesaler but when I turn it on it just says;

"Please enter your 4 digit access number"

Anyone know how to get rid of it? I went into the service mode but thats all I can do.

Thanks

Stirton.M
10-27-2009, 05:14 PM
I just got a nice machine from a wholesaler but when I turn it on it just says;

"Please enter your 4 digit access number"

Anyone know how to get rid of it? I went into the service mode but thats all I can do.

Thanks

Copy track is enabled on the machine.

Disable it through administrator.

Tap the utility key and then press "admin mode" on the screen.

Password is default 0000

This should allow you into the mode (if it does not, let us know)

Touch "copy track"

Touch "copy track mode" and touch "no" and touch enter and back out of admin mode. You may be prompted with a warning about clearing data, select yes to clear it. Once you are done, copy track should be disabled and you can use the machine normally.

You can download the user and admin manuals for this machine from KonicaMinolta.ca or konicaminolta.com

captain1976
10-27-2009, 07:42 PM
Hi,

I went through it but it still wants that 4 digit code, obviously what the old owner put it. Still no able to use. Any other suggestions?

Thanks

captain1976
10-27-2009, 07:44 PM
Let me clarify. I did get into the copy track mode and followed the procedure as you mentioned, but still nothing.

Can't find it in the manual but can look again

Thanks

captain1976
10-27-2009, 08:16 PM
Copy track is enabled on the machine.

Disable it through administrator.

Tap the utility key and then press "admin mode" on the screen.

Password is default 0000

This should allow you into the mode (if it does not, let us know)

Touch "copy track"

Touch "copy track mode" and touch "no" and touch enter and back out of admin mode. You may be prompted with a warning about clearing data, select yes to clear it. Once you are done, copy track should be disabled and you can use the machine normally.

You can download the user and admin manuals for this machine from KonicaMinolta.ca or konicaminolta.com


Guess what? I did it a couple more times and it cleared.

Thanks very much for your help

Custom Search