PDA

View Full Version : Di850 EDH Dead


Custom Search


Dedotch
10-27-2009, 03:42 PM
MY EDH has died. Nothing really happened. The feed roller slipped out of the bearing and caused it not to feed. Fixed that now it is dead, no errors or communication to the machine. Thanks in advance for your help. Scott

Dedotch
10-27-2009, 04:26 PM
Is there a reset. Or a fuse. I checked the 5v to the EDH board it is present. Don't know where to go next.

Dedotch
10-28-2009, 02:20 PM
I think all I have to do is turn it back on. It may have been iso faulted to off. Can someone please give me the switch # for the EDH of a Minolta Di850. Thanks

tony_218
11-12-2009, 12:12 AM
el swit 18 en el mode 25 pero el mio no se puede habilitar por este sistema se ha bloqueado

albasoul06
11-12-2009, 05:34 AM
EDH-5, not recognized by main body.

Solution

CAUSE: The EDH is not selected in the 25 mode.
SOLUTION: To select the RADF in the 25 mode, perform the following:
1. Access the 25 mode (power the machine OFF while holding down on the 2 and 5 keys).
2. Select [1 Software DIP SW].
3. Select DIP SW 18 using the up/down button at the left.
4. Select bit 4 using the up/down on the right.
5. Select OFF
6. Press the PREVIOUS SCREEN button to return to the 25 mode.
7. Power the machine OFF/ON to exit the 25 mode.



The 47 mode can be used to check the sensors and motors. Code 060 has several tests for the document feeder.

Let me know if you need EDH-2 Book

quickdraw44
09-29-2010, 05:15 PM
Yes I would like to receive one.

Custom Search