PDA

View Full Version : Minolta 3102 Need Imaging, Fuser & Transfer stuff

Custom Search


captain1976
10-30-2009, 07:45 PM
Does anyone have either the components to rebuild or have rebuilt ready-to-go units? I will need a few of each
fixthecopier
10-30-2009, 10:52 PM
I have 2 brand new 2002s still in the box, sans the print controllers. If you are serious, I may be able to sell you both for a good price. $1700 each, you pay shipping. I would have to get an OK from the owner.
texasatm12
10-31-2009, 04:06 AM
Does anyone have either the components to rebuild or have rebuilt ready-to-go units? I will need a few of each

I sell brand new fuser for the konica minolta color copiers on ebay texasatm12 user name 4588-513 fuser cf2002 3102. mark
captain1976
10-31-2009, 05:11 AM
I have 2 brand new 2002s still in the box, sans the print controllers. If you are serious, I may be able to sell you both for a good price. $1700 each, you pay shipping. I would have to get an OK from the owner.


Great, send me an email and tell me where you are located.

alfischer1@juno.com
Titan1969
10-31-2009, 01:50 PM
not sure if you know but you can chip the IU and fuse the belt and fuser. All depends on copy quality. Fusers go 2-3 times rated life and belts 2x life usually.
captain1976
10-31-2009, 05:08 PM
Yes, I am aware of this but do you know anyone who does this or has the programmer?

Thanks
Titan1969
10-31-2009, 05:18 PM
Katun will supply the chips pre-programmed. Rebuild kits are N/A. If you find them let me know. I even tried to find drums to slap in to an otherwise good IU...no luck.
captain1976
11-01-2009, 12:12 AM
Katun will supply the chips pre-programmed. Rebuild kits are N/A. If you find them let me know. I even tried to find drums to slap in to an otherwise good IU...no luck.


Thanks, Appreciate he info
condorloco
11-01-2009, 08:47 PM
Can you provide instructions on how to fuse the belt and fuser??
This is my first post but I must say thank you to all who post in this forum.
JustManuals
11-01-2009, 10:28 PM
This Parts & Service manual can now be purchased for $11.77 and downloaded immediately after payment
from The Internet's largest collection of manuals (http://www.justmanuals.com)


Paul@justmanuals.com
fixthecopier
11-04-2009, 11:10 PM
I will sell both new 2002's and a working used 3102 for $3000, buyer pays shipping.
glewisme
11-06-2009, 08:44 PM
Hey,
Copylite sells the reset chips for all IU's for $15.50 outright.For folks in the northeast you can send your chips to copierchip.com and he'll reset your chips and ship them back to you free of charge for $12.50 each you can normally get 2x's the life out of these units w/no Issues. I know the guy copierchip.com he's an absolute genius (we worked y=together for a couple years).CopierChip.com (http://www.copierchip.com/) he'll treat you right he also does it for the C250/252/300/352 and the c451/550/651. Hope this helps !
ccopy
02-19-2010, 04:54 AM
I need the control panel for the cf3102. Anyone have one or know where I can get it?

Custom Search