PDA

View Full Version : C552 w/ FS 526 C-1145 Error Code


Custom Search


emujo
11-12-2009, 07:52 PM
Brand new C552 out of the box. Ver 57 on the main body, ver 25 on FS. Will intermittantly throw a C-1145 (End Stopper motor malfunction). When the code pops, I can see and hear the end motor trying to get the stoppers into home postion, but just a lot of drive train noise. Cycle power and everything initilaizes normally. I can sit with customer and run single/double stapled sets with no issues. 1-2 hours after I leave...same code. Customer says they aren't even using staple feature when code pops. FS has a saddle stitcher and hole punch and these are running with no issues. Any ideas? Emujo

mtgrizrich
06-22-2010, 06:54 PM
We are running into this same exact problem. How did you get this resolved?

mo0651
06-22-2010, 11:18 PM
Here is a troubleshooting guide on this.

emujo
06-23-2010, 01:55 AM
Turned out to be both the stapler assy and the sd PWB. Emujo

mtgrizrich
06-23-2010, 04:22 PM
Thank you very much emujo. But just to clarify, you mean the sd508 drive board, not the finisher c.b?

Custom Search