Resetting Konica 7045 to factory default

[acidbag]

Hello...

Does anybody here have the reset memory to factory defaults code/instruction for Konica 7045?

Found instruction below for Konica 7020, wonder if its the same for Konica 7045.

http://www.copytechnet.com/forums/konica-minolta/27000-konica-7020-a.html

:confused:

[suomi]

i think it is the same

[2] Initial Setting in the field
Each adjustment data is totally returned to the data value when
the machine is delivered from the factory.
Step Operation procedure
1 Enter the 47 mode.
2 [47 mode menu screen]
Press “93” by means of the copy quantity setting
button.
Check that “093-00” appears in the message display
area.
3 Press the Start print button. (*1)
The message display column [NOW] display changes
to [FIN] and resets and ends.
4 To end the setting, press the Stop/Clear button.
5 To end the 47 mode, turn off the SW2 (sub power).
*1: It may be necessary to change the language in both 25
mode and key operator mode after performing the initial
setting.

[albasoul06]

How to reset the machine (initialize memory) to factory defaults.

Solution

To reset memory to factory defaults perform the following:
1. Enter the 25 mode (power the machine ON, while pressing the 2 and 5 keys).
2. Select Software SW.
3. Using the up/down arrows, scroll to address 3-4 (All Memory Reset).
4. Select OFF.
5. Power the machine OFF.
6. Enter the 47 mode (turn the machine ON, while pressing the 4 and 7 keys).
7. Enter 0, 9, 3, and press the START key.
8. Power the machine OFF/ON.