minolta dialta 351 scanner trembles [Archive]

javier4065

11-25-2009, 02:46 AM

I have a big problem with this copier, when i want to make copies the scanner begins to tremble, then an abort message appears on the display and the copier starts to initialize again. What Can I do to solve it .

Hansoon

11-25-2009, 05:08 AM

First thing to check would be if the foil, which is sticked along the exposure lamp, doesn't have cracks. If so they can be easily repaired with conductive paint. Some guys even soldered the cracks together which I never did. For me the paint worked fine.

Hans

fixthecopier

11-25-2009, 11:25 AM

the lamp has a short and should be changed

javier4065

11-25-2009, 01:08 PM

But the lamp is lighting,I will check the foil. thanks.

minimerlin

11-25-2009, 07:03 PM

I have a big problem with this copier, when i want to make copies the scanner begins to tremble, then an abort message appears on the display and the copier starts to initialize again. What Can I do to solve it .Maybe the scan motor or its driver pwb has gone down?

javier4065

01-26-2010, 03:47 PM

the problem was the exposure lamp. the foil was broken. thanks everybody for your answers.

Hansoon

01-26-2010, 06:37 PM

Thanks for the feed back.

Hans