Bizhub C250 paper jam in BayPass

[robizhub]

Bizhub C250 paper jam in bypass with normal paper (A4)
I cleaned all that I could clean but 1 or 2 or 3 sheet goes normal and then jamm in fuser and in bypass.
Thanks!

[tonerspot]

when you get the jam the paper pass the fuser or not

[barratec]

I presume the size setting of the bypass tray is right,so you can try to adjust the "printer regist loop adjust" . You can find it in the 'SERVICE MODE' then 'MACHINE' then 'PRINTER RESIST LOOP'.

[robizhub]

Thanks for answer!
Not pass the fuser i have 2 paper jamed:
One in bypass
second in fuser
thanks!

[robizhub]

AFTER 'SERVICE MODE' then 'MACHINE' then 'PRINTER RESIST LOOP'
THEN FINE TUNNING
MACHINE RUN MUCH BETTER BUT SOME JAMM OCCUR BEFORE FUSER
THANKS.