lexmark optra s 1255

[jlvelez]

need help.

i got a lexmark optra s1255 with a code of 932 service printhead error,but it's not all the time.
can some one please help me.:confused:

[DavidEtling]

Problem is laser unit. You may be able to disassemble, clean and lubricate the polygon motor and get it going. Haven't had great success with the Lexmarks doing this, but might get you going! Otherwise, replace the laser unit!

[JustManuals]

This Parts & Service manual can now be purchased for $11.77 and downloaded immediately after payment
from The Internet's largest collection of manuals (http://www.justmanuals.com)


Paul@justmanuals.com

[prntrfxr]

This happened only once to me (I used to rebuild a pallet of these a week, so it's a rare thing.) I had a bad fan in one and it caused a scanner error. The fan cable and the laser scanner cable are wire-tied together, but aren't connected (at least not externally). I replaced the fan and the error went away. 90% of the time it is the laser scanner though. :)

[blackcat4866]

Interesting, prntrfxr. Laser units can be found still, it's just more difficult to find customers willing to pay for them. =^..^=