PDA

View Full Version : Minolta Di 650


Custom Search


Naveed Shahid
12-05-2009, 09:54 PM
Hello Every One

i am facing a problem machine does not add toner machine have a orginal toner also i check toner feeding unit gear all are ok i feed toner manually after toner end machine copying light when i open drum unit all unit full with toner its not recycling to developer

any one have a good idea

thanks in advance

naveed

minimerlin
12-06-2009, 10:45 PM
Hello Every One

i am facing a problem machine does not add toner machine have a orginal toner also i check toner feeding unit gear all are ok i feed toner manually after toner end machine copying light when i open drum unit all unit full with toner its not recycling to developer

any one have a good idea

thanks in advance

naveedI take it you mean the waste toner is not being recycled to the developer unit, have you checked the operation of the recycling drive clutch, it may be gummed up.

KEVIN900
12-27-2009, 05:12 AM
Sounds like the gears in the rear of the developer unit are shot.

ravikumarj
12-28-2009, 01:32 PM
Did you notice starter spillage near the gears..Change development unit gears with set of bushes it may worn out.....frequently.

Johnny_B500
12-29-2009, 11:02 PM
Sounds like the gears in the rear of the developer unit are shot.

As per quote. The small gear on the back of the developing unit is stripped.

Custom Search