PDA

View Full Version : set KM BH c250 copy color to default??


Custom Search


gerryhuerta
12-11-2009, 05:59 PM
i have a KM bizhub c250 and i was wondering if anyone can help me out by leading me in the right direction as to how to set the copy default to color. its curently in black and i hate manualy switching to color every time i copy. thanks in advanced... p.s. i have searched everywhere, google, software cd's and the konica minolta web site and no luck, i hope someone here can help me out!!

tech51
12-11-2009, 07:24 PM
From the book, here`s how its done.

How to change the default settings for the Copy Mode.
Solution
To specify the default settings of the Copy Mode, perform the following:
1. Press the [Copy] key on the copier operation panel to enter the Copy Mode.
2. Select the setting to make the default value in the Copy Mode.For example, set it to colour.
3. Press the [Utility/Counter] key.
4. Touch the [User Setting] key.
5. Touch the [Initial Setting] key.
6. Touch [Current Setting] followed by [OK].
7. Touch [Close] twice to exit.
Note: The default settings of the Copy Mode can be set to factory default by touching [Factory Default].

gerryhuerta
12-11-2009, 07:54 PM
I will try this. I have the service manual and have been going in the wrong direction. I completely overlooked it.

Custom Search