kennyoleary
01-04-2010, 08:56 PM
Can an FS-507 (finisher for a C450) be put on a C250? I connected an FS-507 to a C-250 but the punch and staple modes did not appear in the finisher screen. I unplugged the FS-507 and plugged in an FS-501 finisher, and the staple mode appeared. I then unplugged the 501 and reconnected the 507 without turning off the machine and the punch and staple feature appeared. When trying to reconnect the 507 finisher at another time, the punch and staple functions were gone. Are they just not compatible?