paulterack
01-12-2010, 08:01 PM
Gents,
everything prints and copies just fine. The problem I'm having ONLY occurs when I'm scanning a document. The resulting scanned image has been shift to left a little MORE than a quarter of an inch. It leaves a vertical line on the right hand side of the paper which is most likely the edge of the scanned original.
Subsequent scans can/will lead to cutting off of document information etc.
any thoughts?
everything prints and copies just fine. The problem I'm having ONLY occurs when I'm scanning a document. The resulting scanned image has been shift to left a little MORE than a quarter of an inch. It leaves a vertical line on the right hand side of the paper which is most likely the edge of the scanned original.
Subsequent scans can/will lead to cutting off of document information etc.
any thoughts?