PDA

View Full Version : biz hub 350


Custom Search


digicor
01-13-2010, 01:10 PM
I have a bizhub 350 making wakout copies
doc feed or glass
the first copie is fine, the second third forth are off the page by a quarter inch...exactlty the same after the first copy,could this be the registration clutch?? the fuser and the IU are relativly new...

mo0651
01-13-2010, 02:37 PM
that would be a good start. :cool:

fixthecopier
01-13-2010, 10:22 PM
Is it only out of one tray? If problem happens from both then change the reg clutch. If it does it from only tray one there is a clutch in that assembly for that tray.

digicor
01-13-2010, 10:39 PM
It was the registration clutch!!

Custom Search