PDA

View Full Version : Error code CO500 in Minolta Dialta 200


Custom Search


vonhetcchtel
01-13-2010, 04:02 PM
Hi. I have an error code in Minolta Dialta 200 and it is displaying CO500.
Please help me correct this error.

lordqpa
01-13-2010, 04:41 PM
This is Fixing Error. Low Temperature. Try:
Localize hole on right side of control panel. In hole is switch. Press it. Machine will restart. Enter “3” from the 10-Key Pad when dot appears at the center on the
left side of the screen while the start-up screen is being displayed.. You'll enter Initialize Mode. Press Trouble Reset. If error apears again, remove Fixing Unit and check lamp, thermo fuse or termistor. Good luck

Custom Search