PDA

View Full Version : xerox 5328


Custom Search


Dr. Mansour
03-18-2007, 12:58 AM
I have cured the heater problem but don't know how to reset the u9 code.........any ideas?

suckis
03-19-2007, 10:31 PM
Does exposure lamp illuminates?

Dr. Mansour
03-20-2007, 12:50 AM
yes it does illuminate.

yasir
05-07-2007, 07:10 AM
check the above mentioned parts always the mentioned parts cause U9 codes check these parts also if they are ok use simlation mode To Reset as press hold zero button while powering on the mahine enter 20-3 then press 0 enter power off&on

I have cured the heater problem but don't know how to reset the u9 code.........any ideas?

Custom Search