PDA

View Full Version : Banner Printing in C6501


Custom Search


Naushad
01-29-2010, 04:18 AM
How to printing 1200mm long paper i.e banner mode in c6501, what need to done in the machine to activate banner mode in C6501

RRodgers
01-29-2010, 04:45 AM
Does it has the large feed trays on the right side of the machine? I think this is only supported threw the bypass tray. Not even sure if this box supports it.

Naushad
01-29-2010, 04:59 AM
thank, how to print from bypass, is there anything to activate in the m/c, as when we select the paper size in b/p the max size it show is 13x19

Stirton.M
01-29-2010, 07:35 AM
Banner printing is not supported on this model. Consult your user manual.

Custom sizes: Maximum 13.0" × 19.2" (330 × 487 mm) to minimum 3.9" × 5.8" (100 × 148 mm).

If you want to do banners, buy a machine that is built to support this. Pretty much every office colour bizhub model above the C350 has banner printing capability. The 6500 and 6501 are production machines, not office models.

Naushad
02-01-2010, 10:53 AM
There are 2 more m/c same c6501, which is been installed in different location, they are able to print the Banner i.e 1200mm long print, but in this m/c iam not able, i want to know is there is setting which i need to do, the firmware ver is also latest i.e ver 60.

mabawser
02-01-2010, 01:36 PM
As far as im aware the machine doesnt support banner printing.

I think you may be mistaken but if you think you are correct then ask the other site how they print on banner paper.

Just looked up paper sizes and they are the same that stirton.m has already posted.

Herrmann
02-01-2010, 08:26 PM
I have found an instruction regarding the 6500/5500, but it may work on the 6501 either:

Banner printing works only with the SMART Version and with the IC408

If a Finisher is attached, you have to remove it, inclusive disconnecting the cables.

Then set Dipsw 10-0 to 1, and 10-1 to 0

Enter your sheets in the bypass, adjust the paper size in the printer driver and strat printing.

Good Luck :)

knpgazem
02-01-2010, 08:35 PM
May i ask what is the "smart version"?

Do you mean the standard setup without all the optional finishers? or are you referring to specific firmware?

ta

Herrmann
02-01-2010, 08:58 PM
SMART version is with the "little" RIP ic 408, with maximum the little paper deck and copy tray or max one finisher.

No special firmware.

adipletosu
01-21-2011, 11:50 AM
I have found an instruction regarding the 6500/5500, but it may work on the 6501 either:

Banner printing works only with the SMART Version and with the IC408

If a Finisher is attached, you have to remove it, inclusive disconnecting the cables.

Then set Dipsw 10-0 to 1, and 10-1 to 0

Enter your sheets in the bypass, adjust the paper size in the printer driver and strat printing.

Good Luck :)


I have installed IC408
But in the printer setting paper size is 487 maximum lenght
How I can modify this?
And where I find settings for Dipsw? In printer adjustments?

Thanks

kronical
01-22-2011, 01:04 AM
I have installed IC408
But in the printer setting paper size is 487 maximum lenght
How I can modify this?
And where I find settings for Dipsw? In printer adjustments?

Thanks

Contact your service rep. Dipsw are accessible through the tech rep mode, and incorrectly modifying these switches can cause alot of serious damage to the machine.

adipletosu
01-24-2011, 06:13 AM
Contact your service rep. Dipsw are accessible through the tech rep mode, and incorrectly modifying these switches can cause alot of serious damage to the machine.

The problem is: My service rep is not happy to help me to print on banner.
I spoked about this.

Stirton.M
01-25-2011, 03:40 AM
OK.

I will reiterate ONCE more


Solution ID TAUS0700390EN* Solution Usage 2
Description
Is banner printing supported?
Solution
Banner printing is not supported on the bizhub PRO C5500/C5501C6500/C6500P/C6501/C6501P/C65hc. This specification cannot be changed. All product
change requests for this feature will be denied.



This pulled straight from a tech service bulletin from technical support site downloaded today.

Herrmann
01-25-2011, 09:12 PM
You are right with the PRO version, but not with the SMART version, as i said before... but, adipletsou, there are changes in service mode necessary, and if your tech refuses to do it, there is no chance for you. I will refuse to tell you as a non tech how to enter service mode and mess evtl. the whole mashine up.

Hemlock
01-26-2011, 01:52 PM
The problem is: My service rep is not happy to help me to print on banner.
I spoked about this.


Then fire him. If the machine's capable of doing something and the tech is too lazy, ignorant or pigheaded to make it work, he/she needs to be put back in the shop as a setup/bench technician.

adipletosu
01-29-2011, 06:59 AM
Is not necessary to reiterate nothing. I know official version.
But the real version is another: this machine is capable to print banner.

The problem is: this machine is not capable to counter banner.
I print one document 330x515mm and machine countered A4.
Surprising, isn't?

Konika-Minolta is not pleased to print on banner and counter A4.
My situation (and for more other KM clients) I pay for any copies (depends on size of copies), so if I print banner and machine counter A4 is not ok for KM (I pay less).

And is more arguments: the older machine (C650) is capable and the newer (6501) is not capable?


OK.

I will reiterate ONCE more


Solution ID TAUS0700390EN* Solution Usage 2
Description
Is banner printing supported?
Solution
Banner printing is not supported on the bizhub PRO C5500/C5501C6500/C6500P/C6501/C6501P/C65hc. This specification cannot be changed. All product
change requests for this feature will be denied.



This pulled straight from a tech service bulletin from technical support site downloaded today.

adipletosu
01-29-2011, 07:11 AM
You are right with the PRO version, but not with the SMART version, as i said before... but, adipletsou, there are changes in service mode necessary, and if your tech refuses to do it, there is no chance for you. I will refuse to tell you as a non tech how to enter service mode and mess evtl. the whole mashine up.
Tks for nothing Herrmann. I resolved the situation.
And enter in service mode is not a mystery as you think.
Tks again

Stirton.M
01-29-2011, 07:02 PM
Banner printing is not supported on the bizhub PRO C5500/C5501C6500/C6500P/C6501/C6501P/C65hc. This specification cannot be changed. All product
change requests for this feature will be denied.

Stirton.M
01-29-2011, 07:44 PM
You are right with the PRO version, but not with the SMART version, as i said before... but, adipletsou, there are changes in service mode necessary, and if your tech refuses to do it, there is no chance for you. I will refuse to tell you as a non tech how to enter service mode and mess evtl. the whole mashine up.

I am not aware of any "SMART" version of this machine. SSD does not reference the item in any shape or form, which would suggest that the variant you speak of is not available in all regions.

Mr Spock
01-30-2011, 12:30 AM
And is more arguments: the older machine (C650) is capable and the newer (6501) is not capable?

The 650 and the 6501 are totally different machines. The 6500 and the 6501 are closer to each other.

Mr Spock
01-30-2011, 12:32 AM
SMART version is with the "little" RIP ic 408, with maximum the little paper deck and copy tray or max one finisher.

No special firmware.

I think this is the Lite/basic version in the USA.

Stirton.M
01-30-2011, 02:25 AM
The 650 and the 6501 are totally different machines. The 6500 and the 6501 are closer to each other.


Not to mention that the C650 is a newer machine.

seniortech
01-30-2011, 01:28 PM
I think this is the Lite/basic version in the USA.

I look after two C6501 machines which are only used for banner printing to print book covers. both have the IC303 Fiery (free standing) LU202 deck and output tray only which has been modified to cope with the longer paper size. My customer only uses the bypass for banner printing. once the relevant dipsw settings have been enabled the machine will banner print without any problems. Customer is really happy with both machines and generally run service to service without a call...

kamalovitch
06-15-2018, 10:11 PM
Hello. I have a problem when I want to print several banners. The 2nd is stuffing. If you have a solution? Thank you

Custom Search