PDA

View Full Version : separate Scan TX report from Fax TX report when the TX report is on


Custom Search


mdavin
02-05-2010, 07:04 PM
I'm trying to find the soft switch that separates the Scan TX report from the Fax TX report when the TX report is set to always print so the machine won't print the tx result for scans. I've done this before but for the life of me I can't find the bit switch, its probably cause I have the NEC manuals and not KM. If any one could help me out and email me the soft switches for the DI 2510 or post them here I'd appreciate it. Mdavin@goldcoast-tech.com

Hawkeye69
02-05-2010, 07:55 PM
Hey mdavin...

try this one: SW 368 BIT 1 = 0
Must work!

Best Regards
Hawkeye69

mdavin
02-08-2010, 02:39 PM
thanks Hawkeye!

Custom Search