PDA

View Full Version : BootUpScreen


Custom Search


Pages : [1] 2

buster68
02-10-2010, 02:15 PM
Anyone had any luck changing the BootUpScreen with the tools provided by KMBS on Knowledgebase?
One of our dumdass technicians made the mistake of telling a salesrep that the bootupscreen logo can be changed from the KM logo to any other logo....so now its up to me to make it work. Yes, I've already slashed said tech's tires and assigned him to one of our bitchiest customers as punishment.

I've followed the steps in the little guide KM provides but the logo is not even close to being legible when I load it on the copier...I'm trying it out on the C452. Anyone have any idea where I can find the mosel_256_01.plt file for the logo pallet? Maybe thats why I'm having a problem?

Any suggestion would be greatly appreciated.

BIG PAPA
02-10-2010, 04:44 PM
Whats an email account, I can email you the plt file. Yes we have gotten it to work. Our owner liked the picture of him at deer camp drinking beer.

SmellsHot
02-10-2010, 04:45 PM
You have to have all the programs to change the picture. It requires Hex Editor Neo to change some of the binary code. Picture can be no larger than 800x480. Kinda a pain in the ass......

buster68
02-10-2010, 05:57 PM
I've followed the directions provided by KMBS, the only thing I'm missing is the correct plt file. I've changed the binary code with the Hex Editor Neo and the picture is 800x172. I'm hoping that after I get the plt file from Big Papa everything will work fine.

buster68
02-10-2010, 07:11 PM
Thanks for all your help, BP. It works great when you have the correct pallete file.

Stirton.M
02-10-2010, 07:29 PM
If I recall from a training session, the KMBS logo should be native on the copier, simply delete the uploaded file is what I was told for this kind of scenario. Could be wrong, it was never tested to see.

BIG PAPA
02-10-2010, 07:47 PM
That is true, just deleting what you have installed does bring back the km logo.

SmellsHot
02-11-2010, 09:23 PM
Make sure to reformat your jump drive everytime you change the picture for the boot up screen. Went round and round with why I couldn't get the new picture to load instead of the old one. Formatting each time worked fine.

westmike1
05-12-2010, 10:36 PM
Can I get the Palette from someone?


Mosel_256_01.plt
email westmike1@hotmail.com

Thanks

newbie
05-14-2010, 09:41 AM
I messed with this for a whole day once, Some asshat service tech from a competitor changed the picture on a customers machine when they got booted from service and we picked it up. He thought it would be cool to change the picture to a dude sucking another dudes D**k. Pretty unprofessional in my opinion. But it was funny, He didn't think we knew how to change it back. And to be honest i didn't until i spent a day working on it lol. But the accountant that work there just happened to be gay and got pretty pissed off. As a matter of fact the tech got shit canned and denied unemployment. If I did that to a customer, even if we were being replaced on service he would kick my ass ha ha

fishleg
05-15-2010, 10:02 AM
What do you look for on the konica site ? I keep hearing about this but have never came across such a tool.

What machines does it work for ? c253 c250 c220 etc ?

Cheers,
Fish

buster68
05-17-2010, 01:16 PM
Go to Knowledgebase and search bootupscreen. It only works on the latest color mfp...C220/C280/C360/C452/C552/C652.

bob2
06-01-2010, 02:50 AM
What's the Knowledgebase document ID?

badaxe73
06-18-2010, 02:47 PM
If some has the Mosel_256_01.plt file could you please email it to me?

I love KM's fine instruction :/

Email: glimtwin73@hotmail.com


Thanks!!!!

BIG PAPA
06-18-2010, 04:16 PM
Check your email.

Chetbungo
06-30-2010, 01:53 AM
I logged in and got everything needed from techweb, and when i started to do this, i also did not have this mosel256.plt file. Can someone please email it to me at Phatbungo@comcast.net thanks

jacquemi
07-06-2010, 04:32 PM
Hi, I deed the Mosel_256_01.plt

if someone have it, I'll appreciate.

michelle.jacques@buropro.qc.ca

Thak you,

rprem
07-07-2010, 01:03 PM
Can someone email me the pallete file? id:rpremnair@gmail.com

MadCityCopy
12-01-2010, 02:01 PM
I also have a question about the bootup screen. Our previous tech before I started was about to load a screen on our demo units but I cant for the life of me figure out how. Or where he stored our file at. If anyone can help me out it would be greatly appreciated. I tried searching KMBS with no luck. KMA connect does not have any information to help also.

bhangdu
12-07-2010, 03:50 AM
Can someone email me the pallete file?

If some has the Mosel_256_01.plt file could you please email it to me?

Email: abhay_777h@yahoo.com


Thanks!!!!

BIG PAPA
12-07-2010, 01:20 PM
Shoot me an email. I will attached the correct plt file.

bhangdu
12-08-2010, 11:22 AM
HI,
Thanks for reply & give me the procedure to do the installation
Email id is abhay_777h@yahoo.com







Shoot me an email. I will attached the correct plt file.

stan780953
03-15-2011, 10:38 PM
Hi

Could someone please email me the Mosel_256_01.plt file.

dsanyasi@hotmail.co.uk


Thank you

bsm2
03-15-2011, 11:56 PM
Sounds like a complete waste of time for a 3 sec screen

CT Copier Repair
03-16-2011, 02:19 AM
and all the newbies want the file
how quaint

LOL learn how to fix before you play

warriors come out to playay

stan780953
03-16-2011, 03:10 PM
I've been asked to look into bootupscreen so thought I would look on here as most people are quite helpful. been fixing copiers for over 10years now so think I can say I know what I'm doing.

aesthetics1
03-16-2011, 05:14 PM
I wanted to chime in and say this actually works on the newer black and white models too, not just the C220/etc series. 223-423 series works great. Really easy to do, takes about 2-3 minutes if you know what you're doing.

ineo+6501
03-16-2011, 06:00 PM
Yip, this works really well and it does only take minutes. I have just put a digital version of our sticker onto a C280 and a 283 this morning.
The machine not only displays the image at switch on, but everytime the machine wakes up from low power/sleep aswell. Really impressive to the customer.

I will say, however, that a new process is available. It includes an image convertor from Konica Minolta which creates the BIN file immediately without the need for the hex editor.
It's much quicker and easier.

LAURENT19
03-17-2011, 06:03 PM
Can you send me the file :

Mosel_256_01.plt by mail laurent@bureaufonctionnel.com

stan780953
03-17-2011, 07:58 PM
and me again please dsanyasi@hotmail.co.uk

Kilangz
03-19-2011, 06:27 PM
Me too ,,,, i just want to create a costumize bootup..mouk_maffia@yahoo.com

jr84
09-02-2011, 12:46 PM
Having the same problem as most of you, I don't have the mosel_256_01.plt file. Could someone please e-mail it to john@arccolourcopiers.com

Thanks

joelea
02-08-2012, 10:25 AM
Hi,

I'm trying this out on an ineo+220 i use the km donau boot screen converter from the KB.

I have managed to get the image uploaded to the machine but the image I use looks corrupted.

Do I need a different pallete file than the one included donau.ct

Regards,

Joe

HoonBoy
03-17-2012, 11:26 PM
I also have been trying to get custom boot screen on some Konica Minolta mfp's with the Donau Boot Screen Converter provided by Konica Minolta(v 1.0) and followed all steps,
but all i get is black screens on the display...is there a newer version? Or is everyone using the "old" procedure with the mosel_256_01.plt file? If there's a new version is there someone who would like to share it, or share the mosel_256_01.plt file(s). Thanks in advance.

hakan
03-22-2012, 06:28 PM
Can you send it to me :)
mhakanates@hotmail.com

kmhri5
04-30-2012, 12:28 PM
Can someone please send me those files? I know this is my first post but this is only place on internet that i could find any useful information.
onakobezveze@gmail.com

Tank you in advance.

mmiikkee1975
05-22-2012, 04:59 PM
Whats an email account, I can email you the plt file. Yes we have gotten it to work. Our owner liked the picture of him at deer camp drinking beer.



hi there i could do with the .plt file picbear doesnt seem to include it

Michko
08-13-2012, 03:21 PM
Dose this work for C284?I have no luck getting custom logo to work..

HoonBoy
08-13-2012, 09:45 PM
Dose this work for C284?I have no luck getting custom logo to work..


Works for me....

Hasse
08-13-2012, 10:20 PM
Interesting thread... would be great to get my company logo on it. Is it possible / does it work on a bizhub c250?

pappyvonsillypants
08-28-2013, 04:41 PM
I am interested in changing the boot screen as well.... can i get the file and instructions by chance? i have been woking on km for 12 years im no idiot, just lazy. any help would be greatly appreciated.

dirtyfingers
09-13-2013, 09:40 AM
I See there is a lot of posts here trying to get the bootscreens to work

There is a NEW Bootscreen creator released by KM Europe.
Its much much easier and you don't need any color palates.

You can drag and drop a Jpeg or BMP onto edit ....edit/zoom ...add color background
Then save it for correct screen aspect ratio (Zeus/MinervaC284/C454 or C280/C452 ratio)

Same method to save into the MFP

HoonBoy
09-13-2013, 02:17 PM
I See there is a lot of posts here trying to get the bootscreens to work

There is a NEW Bootscreen creator released by KM Europe.
Its much much easier and you don't need any color palates.

You can drag and drop a Jpeg or BMP onto edit ....edit/zoom ...add color background
Then save it for correct screen aspect ratio (Zeus/MinervaC284/C454 or C280/C452 ratio)

Same method to save into the MFP


AH nice... Would save some time...

Care to share?

dirtyfingers
09-13-2013, 10:42 PM
I will try to attached it in this post
Its available on KM Europe,KM US and CSES (Bootscreen creator 3.1.1.0)

just make sure the file saved is BootUpScreen.bin
the MFP wont recognize any other filename.


Its now so easy we let our sales people do it !
If a customer is coming in for a demo then they go to their website and grab the company logo
Make a quick bootscreen and the customers are always really impressed.
They feel you care

Its the little things that can make the difference.

HoonBoy
09-17-2013, 01:11 PM
Thank You for that!

rferdi91
09-27-2013, 09:57 AM
i have bizhub 350 here, can i change the boot screen to ?

dirtyfingers
09-29-2013, 03:56 AM
Not for the Bz350
Only BW range is Bz283 etc
Color C280/C452 ,C284/C454 etc
C35 also NO

madmans1
10-17-2013, 05:04 PM
Welcome.


Is the BIZHUB 363 accepts BIN file instead of PNG?

Thanks and regards

dirtyfingers
10-18-2013, 10:24 AM
The application supports PNG files
But the MFP will only recognise the BootUpScreen.bin file (after conversion)

The software is very easy to use.

"just make sure the file is saved is BootUpScreen.bin
the MFP wont recognize any other filename."

madmans1
10-18-2013, 05:43 PM
Welcome


Today I threw the machine and it's OK. It had to be just a name Bootupscreen.bin and booted.


Thanks and Regards

Custom Search