PDA

View Full Version : Konica bizhub 7228


Custom Search


ironpsur2000
02-23-2010, 03:14 PM
I have one that is printing out garbage. I have loaded the drivers on the pc's, and setup the TCIP. With the KM drivers we just get garbage, but with a Xerox driver we get the test print page then a bunch of garbage. I have tried HP 4 drivers but again just garbage, and I have reloaded the K/M pcl drives, and I get one or two lines of garbage on the first sheet and then several blanks Any Ideas?

The computer operating systems are xp and vista

ironpsur2000
02-23-2010, 07:24 PM
Sorry looks like I posted in the wrong section. I have duplicate in connectivity

RockETop
02-25-2010, 02:05 PM
If you are using PS drivers without the PS option on the 7228 controller, you get garbage. Try PCL drivers if you haven't already.

RRodgers
02-25-2010, 03:18 PM
If you are using PS drivers without the PS option on the 7228 controller, you get garbage. Try PCL drivers if you haven't already.
That right there is probably your solution.

Custom Search