View Full Version : Bizhub 500
badbusa
02-26-2010, 05:52 PM
I am showing a Code 2402. I have already replace the elimination lamp and the printer control board as the manual suggests. I was thinking High Voltage board but was looking for opinions. Thanks in advance.
harry2007
02-26-2010, 07:05 PM
check the small connector between drum charge corona (in fact erase lamp) and drum unit (2 wire white and red).
badbusa
02-26-2010, 10:10 PM
I have checked for erase lamp all the way back to connector that connects to PRCB. I have continuity. I made sure all connectors are secure on the drum unit and at the PRCB. No bent pins.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.