PDA

View Full Version : di250 sensor and actuator


Custom Search


listsubscriber
03-01-2010, 05:24 PM
Does anyone have the part numbers for the vertical path sensor, actuator, and spring for the di250? My customer needs the one closest to the imaging unit although I believe both of them located in the vertical path are the same. The machine shows a jam in the fuser area but this sensor/actuator combo is the only thing I see wrong with the machine. Fuser is brand new.

Thanks.

KEVIN900
03-03-2010, 04:17 AM
In the verticle section, close to the synchro clutch & roller ? Also known as the timing clutch & roller ? Sensor; 9335-1510-11. Spring; 1164-3527-02. Actuator; 1164-3504-03. Hope this is what you're looking for. A little lower down on the machine, in the section referred to as "paper take up" section, but looks to me like exiting the cassettes, the sensor is the same, but has a different actuator;1164-3027-01. No spring on this one, though.

listsubscriber
03-07-2010, 05:24 PM
Thanks for looking. I actually found the actuator to be 4498-3329-02. Now, how the heck do I get inside the side of the machine to install? The service manual is pretty bad for dismantling the machine.

connecticcut
03-07-2010, 08:35 PM
same sensor 'close door "(toner bottle),take off this sensor ,it isn't necessary))

Custom Search