View Full Version : konica bizhub 350
mrgene
03-01-2010, 11:02 PM
this is what i get when I work on non ricoh machines.
I installed a new drum and develober ran f8 but am still getting a c 2557 ?
any advice would like to recoup the price of the drum and developer at least lol
KEVIN900
03-02-2010, 02:28 AM
Did you try, with the machine powered up, closing the left door with the image unit out of the machine, and the display reads " Install drum cartridge" or something to that effect. Then resetting the drum & developer counters. Then install the I.U. and quickly running F8 ? Give that a whirl. These copiers are very routine sensitive.
rocky246
03-02-2010, 03:28 AM
Just wondering. Did you reset the drum and developer counters?
mrgene
03-02-2010, 12:08 PM
do not really know how to reset the counters
copytechman
03-02-2010, 12:16 PM
In service mode > Counters > Special parts > IC counter, reset to 0... or no end of troubles. Dev counter increments automatically with F8 function. (IIRC)
Regards!
A.
mrgene
03-02-2010, 09:00 PM
thanks guys did what kevin said and it worked if you ever need ricoh help give me a shout
again thanks
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.