PDA

View Full Version : 7150


Custom Search


Luther
03-06-2010, 04:37 AM
Doing a pm on monday on this machine and for the life of me cant remember the dv setup code in 47 mode and dv counter reset,i know its different on this box then on the 7055/7065 those being in 36 mode hv adj,l-detect any help would be appreciated

smiley
03-06-2010, 02:03 PM
its 47- 95.

Luther
03-06-2010, 02:54 PM
Thank you smiley............does that reset the developer count also?

smiley
03-06-2010, 04:29 PM
i dont think so but try to reset it in 25 mode counter reset.

Coptech
03-07-2010, 03:44 PM
I think that it does reset the dev count but been a long time. 47-018 runs Dmax also. I remember running it after the 47-095. Also run the 095 with the toner tank swung out? I recall that there was a fear that they would add toner during the adjustment and would end up overtoned.

smiley
03-08-2010, 03:57 PM
hi ive done even the toner tank is in but you have to clean 1st the toner recycling unit.and i do not put all the dev. but wait until the machine says dis ingage the dev unit and add dev again.until message goes out and the dev are in right amount.

Custom Search